Fluoro Yellow
Kent Urban Acrylic Paint Marker · 6mm Medium
Reversible bullet and chisel nib. Opaque water based acrylic paint ink, permanent once dry.
Fluoro Yellow #E8F51E · Approximate colour reference, screen calibration may vary

Neon at full volume. Kent Urban Acrylic Paint Marker 6mm Medium Fluoro Yellow is a fluorescent yellow acrylic paint marker with a reversible bullet and chisel nib for neon throw ups, glowing backgrounds and outlines you can see from across the park.

★ Art Shed Staff Tip
Lay a White base first on anything dark, let it dry, then go over it with Fluoro Yellow. The difference is huge.
Perfect For
Neon throw upsGlowing outlinesBackgroundsSkate deck graphicsCanvas piecesLegal walls

Why the Kent Urban 6mm Fluoro Yellow Earns Its Spot

◉ColourFluoro Yellow
Opaque on light and dark surfaces.
★NibReversible bullet and chisel
Bullet about 1.2mm to 3mm, chisel about 0.8mm to 5mm.
◆InkWater based acrylic
Opaque pigment ink, 4ml per marker.
✓FinishPermanent when dry
Waterproof and UV resistant, indoors or out.

Fluoro Yellow in a medium nib fills whole letters with neon. It is the loudest colour in the Kent Urban range.

Black outlines make it glow even harder.

How to Use Your Kent Urban Paint Marker

  1. Shake it. Cap on, shake well until the mixing ball rattles freely.
  2. Prime the nib. On scrap paper, press the nib down gently a few times until the paint flows right to the tip. Do not pump it hard.
  3. Pick your end. Bullet for even lines and fills, chisel for handstyles and thick and thin strokes. The nib is reversible, so swap ends whenever you need to.
  4. Test first. Do a few strokes on scrap to check the flow and colour.
  5. Let it dry, then layer. Water based acrylic dries fast. Wait until it is touch dry before an outline, a shine or another colour.
  6. Store flat. Click the cap on firmly and store the marker flat.

What Is in the Box

  • ✓ 1 x Kent Urban Acrylic Paint Marker, 6mm Medium reversible bullet and chisel nib, Fluoro Yellow

Specifications

Brand and rangeKent Urban
ColourFluoro Yellow
Nib6mm reversible, bullet and chisel
Bullet lineAbout 1.2mm to 3mm
Chisel lineAbout 0.8mm to 5mm
Ink volume4ml per marker
InkWater based acrylic pigment ink, opaque
PermanencePermanent and waterproof once dry, UV resistant
UseIndoor and outdoor
SurfacesWood, metal, glass, plastic, canvas, fabric, stone and more
SafetyNon toxic
Kent code0152830
Barcode9311960152618

Getting the Most From a 6mm Medium Nib

The 6mm is the fill and outline size. Lay the chisel end flat and pull long, overlapping strokes for solid letter fills, then use the bullet end for bold outlines.

Let the first coat dry before adding a second, rather than scrubbing over wet paint. Finish fine details and shines with a 3mm Fine once everything is dry.

Project idea: fill a throw up in Fluoro Yellow, outline in Black, then add a Fluoro Pink outline outside that for a full neon piece.

Need the same colour in a finer line? Grab the 3mm Fine Fluoro Yellow. See every colour in the Kent Urban 6mm Medium paint markers, or browse the full Kent Urban acrylic paint marker range.

Carry up to 20 of your 3mm and 6mm markers in the Kent Urban Marker Case with Keyring.

Questions About the Kent Urban 6mm Fluoro Yellow

Is Kent Urban Fluoro Yellow opaque?

It covers well on white and light surfaces. Fluorescent colours are naturally a little more translucent on dark surfaces, so for full glow on black, put down a White base first.

What is the difference between the bullet and chisel nib?

The Kent Urban 6mm Medium has a reversible nib with a bullet tip on one end and a chisel tip on the other. The bullet draws an even, rounded line of about 1.2mm to 3mm. The chisel is flat, so it gives thin and thick strokes from about 0.8mm to 5mm depending on how you turn it, which is perfect for handstyles and lettering.

What surfaces does the Kent Urban 6mm paint marker work on?

Kent Urban uses water based acrylic paint ink that works on wood, metal, glass, plastic, canvas, fabric, stone and most smooth surfaces. On glossy surfaces like glass and shiny plastic, wipe off any grease first, let each layer dry fully, and seal the piece if it will be handled a lot.

How do I start a new Kent Urban paint marker?

Shake it well with the cap on until you hear the mixing ball rattle. Then hold it nib down on scrap paper and press the nib gently a few times until the paint flows right to the tip. Do not pump it hard, or it floods. If it ever runs dry mid piece, cap it, shake it and prime it again.

Can I use Kent Urban paint markers on sneakers?

Yes. Kent lists fabric among the surfaces the range works on, and the acrylic ink grips well on canvas sneakers and smooth leather. Clean the area first, build the colour in light layers, let each layer dry fully, and finish with a clear sealer so your design survives scuffs and wear.

How should I store Kent Urban paint markers?

Flat, with the caps clicked on firmly. Flat storage keeps the paint spread evenly through the marker so it is ready to go, and a tight cap stops the nib drying out between sessions.

How do I swap the Kent Urban nib from bullet to chisel?

The nib is reversible, with a bullet tip on one end and a chisel on the other. Cap the marker and give it a shake first, then gently pull the nib out, turn it around and push it back in firmly. Clean fingers or a pair of tweezers make it easy. Prime it on scrap paper before you start again.

Where can I buy Kent Urban paint markers in Australia?

Right here. Art Shed Online is an authorised Australian stockist of Kent Urban, buying through the official Australian distributor, so you get genuine stock, never a grey import. We ship fast Australia wide, and our team are artists who use these products themselves, so ask us anything. Kent Urban Fluoro Yellow also comes in the 3mm Fine size, and we carry every other Kent Urban nib size too.

(NU0152830)

SKU NU0152830
Barcode # 9311960152618
Brand Kent
Shipping Weight 0.0220kg
Shipping Width 0.020m
Shipping Height 0.020m
Shipping Length 0.145m
Shipping Cubic 0.000058000m3