Glass Coat Resin Coaster Making Kit - Makes Two Coasters

The Glass Coat Resin Coaster Making Kit is the perfect way for beginners to start experimenting with resin artworks! With easy step-by-step instructions included, beginners and experienced resin casters alike will be able to make pretty coasters for beverages, perfect for styling your home with or as a beautiful hand-made gift for friends.

The Glass Coat Liquid Gloss Resin included in this kit is an easy to mix, 2-part epoxy resin system. The cast resin is touch dry in 24 hours, and fully cures in 2-3 weeks, at which point it forms a super hard surface that is heat and scratch resistant! Once fully cured, your new coaster creations will be fully functional and help you protect your tables from hot drinks and dinner plates in style.

Note that finished pieces from your Glass Coat Resin Coaster Making Kit are not dishwasher, microwave, or oven-safe. 

Use within six months. Please read directions carefully and wear protective gloves.

Glass Coat Resin Coaster Making Kit includes:

• Glass Coat 120ml (60ml part A + 60ml part B)
• 1 x 9cm diameter silicon round coaster mould
• 3 x 12ml Acrylic Paint Tubes (Titanium White, Yellow Ochre, Burnt Sienna)
• 6 x 100ml Plastic Measuring Cups
• 6 x Plastic Mixing Sticks
• Information Sheet

How to use your Glass Coat Resin Coaster Making Kit:

1. Prepare your mould by wiping it clean.
2. Combine 30ml of each Part A & Part B into a single measuring cup for a total of 60ml, then mix well.
3. Spread the mixture across 3 measuring cups, with 20ml in each cup.
4. Add a different colour paint into each cup and mix well.
5. Pour into your coaster mould and allow to dry for 48 hours before removing from the mould.

How to store your Glass Coat Resin Coaster Making Kit:

For best results, make sure to store Glass Coat Liquid Gloss at room temperature (approximately 20°C), out of direct sunlight, and use within 6 months.

Safety Directions:

Avoid contact with eyes and skin. Wear eye protection and protective gloves when mixing or using. Avoid breathing vapours. Provide adequate ventilation.

If you get the resin mixture on your skin, wash it off immediately with warm soapy water. Use cleaning alcohol or an acetone cleaning solvent to clean up spills, runs, drips and equipment.